Christie DLV1280 DX User Manual page 86

Individual Projectors
All Projectors
Individual Projectors
NOTE: A starting point should not be 100% because this color could not then
be added to the mix for either of the two remaining primary colors, therefore
limiting the success of matching all colors.
2d) MATCH ALL LIGHT OUTPUT:
Using the ### function to talk to the other projectors individually, reduce
Lamp Power settings as necessary until each projector has approximately the
same light output as the dimmest.
Step 3: PRIMARY COLOR ADJUSTMENT
3a) SELECT GREEN PRIMARY SUBMENU:
( Menu ),
select the Green
Primary option.
The Green
Primary menu
will appear and
your screens
will turn to a
full green field.
See Figure
3.31.
3b) MATCH GREEN LIGHT
OUTPUT:
Compare
green fields and choose
the dimmest. In the
Green Primary menu
for each remaining
projector, reduce the
Green White Level as
necessary until all
green light output
appears to match. See
right.
3c) MATCH GREENS:
(i.e. the screen which you feel is furthest from "pure green" and leans slightly
toward yellow or blue). In the Green Primary menu for each remaining
projector—starting with the adjacent projector—add red or blue as necessary
until all green fields match the first, both in color and light output. Sometimes
all projectors need
color added, other
times certain
projectors will need
red and others will
need blue, etc. See
right. NOTE: Green
affects the light
output of any color
the most, blue the
least.
Compare all white fields and choose the dimmest.
In the Adjust Primary Color (CSC) menu
Figure 3.31. Go to the Green Primary Menu
with Green Field
Figure 3.32. Reduce Primary White Level if
Compare green fields and choose the least saturated green
Figure 3.33. Add Secondary Colors As Necessary
OPERATION
Necessary
DLV1280 DX User's Manual
3-53