Setting Up Netware Print Server; Setting Up The Novell Iprint - Toshiba e-Studio2000AC Software Installation Manual

Setting Up NetWare Print Server

0.
This equipment supports the following Novell printing services:
 NetWare 6.5 iPrint mode
This chapter provides an overview of how to set up this equipment as a Novell Network Printer, Print Server, or NDPS
Printer Agent. For more detailed information, refer to your Novell documentation.
 Setting up the Novell iPrint
This equipment also supports the Novell iPrint. Using the Novell iPrint, you can set up the printer that can be accessed
using URL from client computers. The Novell iPrint is based on the NDPS architecture so that you must have NDPS
installed and configured in the NetWare print server.
Before setting up the Novell iPrint, confirm the following:
 The NDPS Broker, NDPS Manager, and NDPS Printer must be created.
 The Novell iManager must be installed.
For more information about installing the Novell iManager, see the documentation for the Novell iManager that is
provided by Novell, Inc.
In order to set up the iPrint system, the network administrator must do the following:
1. Installing Novell iPrint
 P.22 "Installing Novell iPrint"
2. Enabling the DNS on the Printer Services Manager
 P.22 "Enabling DNS"
3. Enabling iPrint service
 P.23 "Enabling Novell iPrint"
 Installing Novell iPrint
Install iPrint Client from "http://[IP address of NetWare server]/ipp".
1
 Enabling DNS
Before enabling DNS for the Printer Services Manager, you should add the DNS name for the Printer Services Manager
to the DNS server.
After you add the DNS to the DNS server, follow the steps below to enable the DNS on the Printer Services Manager.
At the server console, enter the following syntax.
1
NDPSM <NDPS Manager Name> /dnsname=<NDPS Manager DNS Name>

22 Setting Up NetWare Print Server