Setting The Ipx/Spx Protocol; Setting The Netware Settings - Toshiba E-STUDIO287CS User Manual

SETTING ITEMS (ADMIN)
Specify the following items as required and
2
press .
1
2
Item name
ENABLE DHCP
(IP Address)
3
ENABLE DHCP
(OPTIONS)
4
FQDN Option
5
FQDN Update
Method
6
Note
• [ENABLE DHCP (IP Address)] and [ENABLE DHCP
(OPTIONS)] cannot be disabled simultaneously.
7
Description
• ENABLE — Press this button
to use the IPv6 address issued
by the DHCPv6 server.
• DISABLE — Press this button
to disable the IPv6 address
issued by the DHCPv6 server.
• ENABLE — Press this button
to use the optional information
(IPv6 address for the DNS
server, etc.) other than the
IPv6 address for this
equipment issued by the
DHCPv6 server.
• DISABLE — Press this button
to not use the optional
information other than the IPv6
address for this equipment
issued by the DHCPv6 server.
• ENABLE — Press this button
to assign a FQDN (Fully
Qualified Domain Name) using
the DNS server.
• DISABLE — Press this button
to not assign a FQDN using
the DNS server.
• CLIENT — Press this button to
update the DNS server from
this equipment.
• SERVER — Press this button
to update the DNS server from
the DHCPv6 server.
Confirm the settings and press [OK].
3
You will be returned to the NETWORK menu.
Memo
• The IPv6 address acquired from the DHCPv6 server is
displayed.

Setting the IPX/SPX protocol

You can set the IPX/SPX protocol in this equipment. The IPX/
SPX protocol is normally used to communicate with the
NetWare file server through the network.
Item name
ENABLE IPX/SPX
FRAME TYPE

Setting the NetWare settings

You can set the NetWare configuration to be connected.
Note
• This option must be set when you use the NetWare file
server for Novell printing.
- 284 -
Description
• ENABLE — Press this button to use
the IPX/SPX protocol in this
equipment.
• DISABLE — Press this button to
disable the IPX/SPX protocol.
Press [AUTO] to automatically detect
the appropriate frame type, or press a
specific frame type button. If you do not
know the frame type that must be used,
select [AUTO].