Off / On On - Kyocera 5035 Operation Manual

Default setting
Erased border width Determines the default value for the width of the
border to be erased in the two border erase modes.
Copy limit Sets the limit for the number of copies (or copy sets)
that can be made at a time.
Repeat copying ON/ Sets whether or not to prohibit repeat copying, as
OFF well as whether or not to make repeat copying the
default setting in the initial mode. Sets whether to
turn the repeat copy mode ON or OFF.
Sets whether or not to make repeat copying the
default setting in the initial mode.
* This setting is displayed when the optional Hard
Disk is installed.
Registration keys ON/ Sets whether or not to allow a "Register" key to be
OFF displayed in the screen for those function and modes
which can be registered under the registration keys.
Functions and/or modes can only be registered
under registration keys through the "Register" key.
Customize screen layout Changes the order of the main functions and modes
(Main functions) that are displayed in the "Basic" and the "User
choice" tabs in order to make the display more
appropriate to the way you use the copier.
* Up to 6 functions and modes can be listed and
displayed.
Customize screen layout Adds often-used functions and/or modes, and
(Add functions) changes the order of their layout, in order to make
the display more appropriate to the way you use the
copier.
Section 7 COPIER MANAGEMENT FUNCTIONS
Description Available settings
Inch specification Inch
Outside border: specification
0 – 3/4 (inches) Outside border:
Center area: 1/4 (inches)
0 – 1 (inches) Center area:
1/2
1/2 (inches)
Metric specification Metric
Outside border: specification
0 – 18 (mm) Outside border:
Center area: 6 (mm)
0 – 36 (mm) Center area:
12 (mm)
1 – 999 999
Off / On On
Off / On Off
Off / On On
Exposure Mode / 1 Exposure
Reduce/Enlarge /
Sort/Finished / 2 Reduce/
1/2 sided /
Original size / 3 Sort/Finished
Orig. quality 4 1/2 sided
[Quality orig.] 5 Original size
6 Orig. quality
[Quality orig.]
All functions and modes 7 Margin
other than those in the 8 Border Erase
"Basic" tab and the
"main functions" in the 9 Combine
"User choice" tab.
10 (None)
11 (None)
12 (None)
13 (None)
Factory Reference
setting page
7-81
7-82
7-83
7-84
7-85
Mode
Enlarge
7-86
[Erase Mode]
[Merge]
7-61