Kyocera 5035 Operation Manual page 150

Section 7 COPIER MANAGEMENT FUNCTIONS
3 To set the maximum number of originals that can be scanned
under this ID-code, touch the "Counter limit" key and proceed
to the next step.
To allow unlimited scanning, touch the "No limit" key, and to
cancel scanning privileges completely, touch the "Is not
permitted" key and proceed to step 5.
Inch specifications
Scanner limitation
No limit
Counter
limit
Is not
permitted
Management - Management edit - New register
Metric specifications
Scanner limitation
No limit
Counter
limit
Is not
permited
Management - Management edit - New register
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Use the numeric keys on the keypad to enter the maximum
number of originals that can be scanned under this ID-code.
The scanning limit can be set to any 1-page increment up to
999,999.
Inch specifications
Scanner limitation
Limited value
No limit
Counter
limit
Is not
permitted
Management - Management edit - New register
Metric specifications
Scanner limitation
Limited value
No limit
Counter
limit
Is not
permited
Management - Management edit - New register
5 Touch the "Close" key.
The touch panel will return to the screen in step 2.
7-12
Back
Back
Back
(1~999,999)
999,999
Clear
Back
(1~999,999)
999,999
Clear
Fax transmission restrictions
Perform the following procedure when you want to set the maximum
number of documents that can be transmitted under the
corresponding department ID-code when the optional Fax Kit is
installed in your copier.
NOTE
Close
This setting will only be available when "On" is selected as the "Fax
function management ON/OFF" setting.
1 Access the screen that contains the copy restriction setting
items.
(See "Register new department ID-codes" on page 7-4 or
"Change restrictions for use" on page 7-20.)
Inch specifications
Close
Management edit
Department
01
02
0001
0014
00000015
00000016
00000017
Default setting - Management
Metric specifications
Management edit
Department
01
02
0001
0014
00000015
00000016
00000017
Default setting - Management
2
Select "Fax transm. Limitation" under the "Setting item"
column on the left side of the touch panel and then touch the
Close
"Change #" key.
The "Fax transm. Limitation" screen will be displayed.
Inch specifications
Limit in use
0007
Copy limitation
Printer limitation
Output limitation
Scanner limitation
Fax Transm. Limitation
Close
Default setting - Management - Management edit
Metric specifications
Limit in use
0007
Copy limitation
Printer limitation
Output limitation
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
Up
1st Sales Dept.
2nd Sales Dept.
3rd Sales Dept.
4th Sales Dept.
5th Sales Dept.
6th Sales Dept.
Down
7th Sales Dept.
001/010
Up
1st Sales Dept.
2nd Sales Dept.
3rd Sales Dept.
4th Sales Dept.
5th Sales Dept.
6th Sales Dept.
Down
7th Sales Dept.
001/010
1st Sales Dept.
Setting item Value
On
On
No limit
No limit
No limit
1st Sales Dept.
Setting item Value
On
On
No limit
No limit
No limit
Close
Order of
indication
Mgt. Inf. Limit
correction in use
Delete
Register
Close
Order of
indication
Mgt. Inf. Limit
correction in use
Delete
Register
Close
Change #
Close
Change #