Kyocera 5035 Operation Manual page 184

Section 7 COPIER MANAGEMENT FUNCTIONS
● Multi-bypass tray settings display ON/OFF
Perform the following procedure to have the "Bypass setting" screen
appear whenever the "Bypass" key is pressed in the "Basic" tab.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Check bypass sizing" in the settings list on the left
side of the touch panel and then touch the "Change #" key.
The "Check bypass sizing" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Paper type (1st drawer)
Paper type (2nd drawer)
Paper type (3rd drawer)
Paper type (4th drawer)
Check bypass sizing
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Paper type (1st cassette)
Paper type (2nd cassette)
Paper type (3rd cassette)
Paper type (4th cassette)
Check bypass sizing
Default setting
7-45
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
Plain
Plain
Plain
Plain
Off
Change #
Setting mode
Plain
Plain
Plain
Plain
Off Change #
3 Touch the "On" key if you want to have the "Bypass setting"
screen appear.
Inch specifications
Check bypass sizing
Default setting - Machine default
End
Metric specifications
Counter
Check bypass sizing
check
User
Adjustment
Default setting - Machine default
End
NOTE
Counter
check
If you want to quit the displayed setting without changing it, touch the
User
Adjustment
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
Close
6 Touch the "End" key. The touch panel will return to the
Up
contents of the "Basic" tab.
Down
Close
Up
Down
Display and check bypass setting mode when selecting.
Select "On" when using custom size or changing paper type.
On
Off
Display and check bypass setting mode when selecting.
Select "On" when using custom size or changing paper type.
On
Off
Back Close
Back Close