Kyocera 5035 Operation Manual page 114

Section 5 OTHER CONVENIENT FUNCTIONS
@ Selecting the repeat copy mode
This procedure allow you to select the repeat copy mode so that you
can make any necessary number of additional copies later.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Modify Copy" key. The "Modify Copy" screen will be
displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto
Border Select
Erase orig.size
None None
Margin/
Page #
Centering
Basic Quality
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
Off Auto
Erase Select
size orig.
Mode
None None
Margin/ Page
numbering
Imag.shift
Basic Quality
NOTES
• To make additional copies with the repeat copy mode, refer to
"(2) Printing out with the repeat copy mode" on page 5-43.
• The setting in regard to whether or not to use the repeat copy mode
can only be made in the first step of the job build mode and will
apply to all steps in the copy job.
2 Touch the "On" key to select the repeat copy mode.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Modify Copy
Off
On
Metric specifications
Ready to Job build.
Set original. Press Start key.
Modify copy
Off
On
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
5-68
Off
Insert page
Modify
Copy
2 sided copy-Left
Finished page # : 0
Edit
None
Insert
blank page
Modify
copy
2-sided Copy-Left
Finished page #: 0
Edit
Back
W h e n s e l e c t [ O n ] , d a t a c a n b e s ave d .
Yo u c a n r e c a l l a n d r e - p r i n t a t a ny t i m e.
Yo u c a n s e t t h e p a s swo r d t o s e c u r e
s ave d d o c u m e n t .
Back
When select [On], job can be saved.
When the mode is set [On], it can
You can recall and re-print at anytime.
save a job data and reprint it anytime.
You can set a password to secure saved
And you can set that other user are not
document.
able to reprint.
# Selecting the margin mode or the centering/image shift mode
This procedure selects the margin mode or the centering/image shift
mode in order to create a margin space or center the copy image.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Margin/Centering" ["Margin/Imag. shift"] key. The "Margin/
Centering" ["Margin/Imag. shift"] screen will be displayed.
Inch specifications
Set
Ready to Job build.
Place originals then press Start key.
End Job Build - Step1
Off
Border
Erase
None
Margin/
Centering
Basic
Metric specifications
Set
Ready to Job build.
Set original. Press Start key.
End Job Build - Step1
Off
Erase
Mode
None
Margin/
Imag.shift
Basic
NOTE
The setting in regard to the margin mode or the centering/image shift
mode can only be made in the first step of the job build mode and will
apply to all steps in the copy job.
2 Touch the "Margin" key or the "Centering" ["Imag.shift"] key,
as appropriate.
For more detailed information on these two settings, refer to
the explanation for the margin mode on page 5-6 or the
centering/image shift mode on page 5-8, as appropriate.
Set
Inch specifications
Close
Ready to Job build.
Place originals then press Start key.
Margin/Centering
None
Margin
Centering
Set
Metric specifications
Close
Ready to Job build.
Set original. Press Start key.
Margin/Image shift
None
Margin
Image
shift
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Auto Off
Select Modify
orig.size Copy
2 sided copy-Left
None
Finished page # : 0
Page #
Quality Edit
Auto None
Select Modify
size orig. copy
2-sided Copy-Left
None
Finished page #: 0
Page
numbering
Quality Edit
Reposition image to left/right or
top/bottom, and also center image
on paper.
Reposition image to left/right or
top/bottom and center image on paper.
Set
End
Insert page
Set
End
Insert
blank page
Set
Back Close
Set
Back Close