Kyocera 5035 Operation Manual page 173

● Total count for specified paper size (1 to 5)
Perform the following procedure when you want to register a specific
paper size in order to calculate and check the copy counts for that
particular size of paper. It is also possible to register a paper size AND
type.
NOTES
• You can register up to 5 different paper sizes for this function.
• If the type of paper is not registered in any of the settings, the
corresponding copy counts for that size of paper will be calculated
regardless of the type of paper that is used. However, if the same
size of paper is registered in another setting along with a paper type,
the counts for the first setting will NOT include copies made with the
type of paper that is registered in the second setting.
1 Select one of the "Total size 1" through "Total size 5" settings
under the "Setting item" column on the left side of the touch
panel and then touch the "Change #" key.
The corresponding setting screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management - Managem. Def set.
Metric specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management - Managem. Def set.
Value
On
On
Unable to use
999999
1 /
8 x11" No specif.
2
1 /
8 x11" No specif.
Change #
2
1
8 / x11" No specif.
2
Value
On
On
You cannot use
999999
A3 No specif.
B4 No specif.
Change #
A4 No specif.
Section 7 COPIER MANAGEMENT FUNCTIONS
2 Touch the "On" key.
Inch specifications
Total size 1
Can set totals of paper size and type.
Off
On
Default setting - Management - Managem. Def set.
Metric specifications
Total size 1
Can set totals of paper size and type.
Off
On
Default setting - Management - Managem. Def set.
3
Touch the "Select size" key.
Inch specifications
Close
Total size 1
Can set totals of paper size and type.
Off
On
Default setting - Management - Managem. Def set.
Metric specifications
Close
Total size 1
Can set totals of paper size and type.
Off
On
Default setting - Management - Managem. Def set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
Paper size
1
8 / x11"
2
Select
size
Paper size
A4
Select
size
Back Close
Back Close
Back Close
Paper type
With no
specif. Select
paper type
Back Close
Paper type
With no
specif.
Select
paper type
7-35