Kyocera 5035 Operation Manual page 182

Section 7 COPIER MANAGEMENT FUNCTIONS
● Paper size (drawer[cassette] No.1 – No.4)
Perform the following procedure to set the size of paper that is loaded
in drawer[cassette] No.1 through No.4.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select one of the "Paper size" settings
("1st drawer[cassette]" through "4th drawer[cassette]") in the
settings list on the left side of the touch panel and then touch
the "Change #" key.
The screen to set the paper size for that drawer[cassette] will
be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Auto drawer switching
Paper size (1st drawer)
Paper size (2nd drawer)
Paper size (3rd drawer)
Paper size (4th drawer)
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Auto cassette switching
Paper size (1st cassette)
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper size (4th cassette)
Default setting
7-43
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
On / All types of paper
Auto / Inch
Auto / Inch
Auto / Inch
Auto / Inch Change #
Setting mode
On / All types of paper
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter
Change #
Auto / Centimeter
3 If you select "Auto Detection" (automatic size detection) here,
select the desired unit of measure ("Centimeter" or "Inch") as
well.
If you select "Standard sizes" (standard paper size) here,
simply touch the key that corresponds to the size of paper
that is loaded in that drawer[cassette].
Inch specifications
Paper type(1st drawer)
Auto
Detection
End
Standard
sizes
Counter
check
Default setting - Machine default
User
Adjustment
Metric specifications
Paper size (1st cassette)
End
Auto
Detection
Standard
sizes
Counter
check
User
Default setting - Machine default
Adjustment
NOTES
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
• The setting for drawer[cassette] No.3 and No.4 will only be available
when the optional Paper Feeder is installed on your copier.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
5 Touch the "Close" key once again. The touch panel will return
Up
to the "Default setting"screen.
Down
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Select paper size.
A3 B4 11x17"
A4 8 1 / x14"
B5
2
11x8 1
A4 B5
8 1 / x11"
A5 Folio
2
Select paper size.
A3 B4 11x17"
A4 B5 8 1 / x14"
2
B5 11x8 1
A4
8 1 / x11"
A5 Folio
2
Back Close
1 1
5 / x8 / "
2 2
8 1 / x13"
2
/ " 8K
2
16K
Back Close
5 1 / x8 1 / "
2 2
8 1 / x13"
2
/ " 8K
2
16K