Kyocera 5035 Operation Manual page 155

4 Verify that this is the ID-code that you want to delete, and
touch the "Yes" key.
The touch panel will return to the screen in step 3.
Inch specifications
ID-code:
Name to display:
Are you sure you want to delete this ID-code?
Yes
Metric specifications
ID-code:
Name to display:
Are you sure you want to delete this ID-code?
Yes
NOTE
If you want to delete another ID-code, repeat steps 3 and 4.
5 Touch the "Close" key.
The touch panel will return to the screen in step 2.
0007
1st Sales Dept.
No
0007
1st Sales Dept.
No
Section 7 COPIER MANAGEMENT FUNCTIONS
● Change registered information
Perform the following procedure when you want to change a
previously registered department name or the corresponding ID-code.
1 Access the copy management menu screen.
(See "(2) Accessing the copy management menu screen" on
Stop
page 7-3.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Stop
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2 Touch the "Management edit" key.
The "Management edit" screen will be displayed.
Inch specifications
Management
Managem. Total
Management
total
Default setting
Metric specifications
Management
Managem. Total
Management
total
Default setting
Language Management
Bypass BOX
setting Management
Document Register Print
Management orig. size report
Language Management
Bypass Hard Disk
setting Management
Document Register Print
Management orig. size report
Register/Sett.
Each Mgt. Management Management
Total edit Def. Set.
Register/Sett.
Each Mgt. Management Management
Total edit Def. Set.
End
Counter
check
User
Adjustment
End
Counter
check
User
Adjustment
Close
Management
Off
On
Close
Management
Off
On
7-17