Kyocera 5035 Operation Manual page 10

We have determined as a participating company in the International
Energy Star Program that this product is compliant with the standards
laid out in the International Energy Star Program.
About the International Energy Star Program
International Energy Star Program has as its basic goals the
promotion of efficient energy use and the reduction of the
environmental pollution that accompanies energy consumption by
promoting the manufacture and sale of products that fulfill program
standards.
International Energy Star Program standards require that copies
come equipped with a "Low Power Mode" where energy consumption
is reduced after a certain amount of time elapses since the device
was last used, as well as an "Off Mode" where the device
automatically turns itself off after there is no activity within a set
amount of time. When the copier includes printer and fax functions,
the printer and fax must enter a "Low Power Mode" where power
consumption is automatically reduced after a certain amount of time
elapses since they were last used, and they must also support a
"Sleep Mode" where power consumption is reduced to a minimum
when there is no activity within a set amount of time.
This product is equipped with the following features as a result of its
compliance with International Energy Star Program standards.
* When you are using the copier functions of this machine, replace all references to the "Sleep Mode" with the "Off Mode".
viii
● Low Power Mode
The device automatically enters "Low Power Mode" when 15 minutes
have passed since the device was last used. The amount of time of no
activity that must pass before "Low Power Mode" is activated may be
lengthened. See "5. Energy-saving modes" on page 4-11 and "Auto
low power time" on page 7-48 for more information.
● Off Mode (Only when using the copier functions of this machine)
The device automatically enters "Off Mode" when 60 minutes have
passed since the device was last used. The amount of time of no
activity that must pass before "Off Mode" is activated may be
lengthened. For more information see "5. Energy-saving modes" on
page 4-11 and "Auto sleep time" on page 7-47.
● Sleep Mode (If the copier has printer and/or facsimile function)
The device automatically enters "Sleep Mode" when 60 minutes have
passed since the device was last used. The amount of time of no
activity that must pass before "Sleep Mode" is activated may be
lengthened. For more information see "5. Energy-saving modes" on
page 4-11 and "Auto sleep time" on page 7-47.
● Automatic 2-Sided Copy Function
The Energy Star Program encourages the use of 2-sided copying
which reduces the load on the environment and this device includes
2-sided copying as a standard function. For example, by copying two
1-sided originals onto a single sheet of paper as a 2-sided copy, it is
possible to lower the amount of paper used.
For more information see "1. Making 2-sided copies from various types
of originals [2-sided copy modes]" on page 5-1.
● Paper Recycling
The Energy Star Program encourages the use of environmentally
friendly recycled paper. Your sales or service representative can
provide information about recommended paper types.