Kyocera 5035 Operation Manual page 187

● Auto sleep time
Perform the following procedure to set the amount of time that will
elapse before the auto sleep function engages and turns the copier
OFF (O) if no operation has been performed on the copier during that
time.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Sleep mode changing time" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Sleep mode changing time" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Sleep mode changing time
Low power mode chng. time
Select Copy output mode
Select FAX output mode
Select the main mode
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Sleep mode changing time
Low power mode chng. time
Select COPY output mode
Select FAX output mode
Select main mode
Default setting
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
60 Minute
15 Minute
Inner tray
Inner tray
Change #
Copy mode
Setting mode
60 Minute
15 Minute
Inner tray
Inner tray
Change #
COPY Mode
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Touch the "+" key or the "–" key to change the displayed time
to the desired setting (between 1 minutes and 240 minutes).
Inch specifications
Sleep mode changing time
Default setting - Machine default
Metric specifications
End
Sleep mode changing time
Counter
check
User
Adjustment
Default setting - Machine default
End
NOTES
Counter
• The setting can be made to 1 minute, 5 minutes, 15 minutes, 30
check
minutes, 45 minutes, 60 minutes, 90 minutes, 120 minutes, 180
User
Adjustment
minutes or 240 minutes.
• It is recommended that you try to set a longer time interval before
the auto sleep function engages if you use the copier frequently, and
to a shorter time if there are long intervals between use.
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
Up
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
Down
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Set Changing time to turn automatically into sleep mode
after last setting,or when copying is done.
Minute
+
–
Set Changing time to turn automatically into sleep mode
after last setting,or when copying is done.
Minute
Back Close
Back Close
7-47