Kyocera 5035 Operation Manual page 223

● Repeat copying ON/OFF
Perform the following procedure to set whether or not to prohibit
repeat copying, as well as whether or not to make repeat copying the
default setting in the initial mode.
NOTE
This setting is displayed when the optional Hard Disk is installed.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-62.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Modify Copy" in the settings list on the left side of the
touch panel and then touch the "Change #" key.
The "Modify Copy" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Preset limit
Modify Copy
Display register key
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Preset limit
Modify copy
Display"Register"key
Customize(Main function)
Customize(Add function)
Default setting
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
999 Set
On / Default Off
On
Change #
Setting mode
999 Set
On / Default Off
On
Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3 If you want to prohibit repeat copying, touch the "Off" key. If
you want to make repeat copying the default setting in the
initial mode, touch the "On" key.
Inch specifications
Modify Copy
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Modify copy
End
Counter
check
User
Adjustment
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
End
"Back" key. The touch panel will return to the screen in step 2.
Counter
check
User
Adjustment
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
S e l e c t O N t o a c t i va t e M o d i f y C o py o r O F F
t o i n a c t i va t e i t .
F u n c t i o n D e fa u l t
O f f O f f
O n O n
Select ON to activate Modify Copy or OFF
to inactivate it.
Function Default
Off Off
On On
Back Close
Back Close
7-83