Kyocera 5035 Operation Manual page 135

4 Touch the "Box Password" key. A verification screen will be
displayed.
Inch specifications
Box editing
007
JOB005 1
JOB004 1
JOB003 1
JOB002 1
JOB001 1
Document Management - Synergy Print Box
Metric specifications
Box editing
007 Box ABCDEFGHIJK
1
JOB005
JOB004
1
JOB003 1
JOB002 1
JOB001 1
Document Management - Synergy Print Box
5 Use the keypad to enter the new password for that box and
then touch the "Enter" key. The new password will be
registered and the touch panel will return to the screen in
step 4.
Inch specifications
Box Password
Enter password.
New password
007
Metric specifications
Box Password
Enter password
New password ********
007 Box Name ABCDEFG
NOTES
• The password can be between 1 and 8 digits long.
• If you decide not to register a password for that box, touch the
"Clear" key and then, with nothing entered in the password field,
touch the "Enter" key.
6 Touch the "End" key. The touch panel will return to the
screen in step 2.
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
Order of
Up
indication
WED 15:32
Conf/Crrt
WED 15:33
details
WED 15:34
WED 15:35
Down Delete
WED 15:37
001/005
Order of
Up
indication
WED 15:32
Check/ Rev.
WED 15:33
details
WED 15:34
WED 15:35
Down Delete
WED 15:37
001/005
(Enter by #key)
Clear
(Enter #-key)
Clear
End
Delete all
data / box
Box
Password
End
Delete all
box data
Box
Password
Stop
Enter
Stop
Enter
6-19