Accessing The Machine Default Settings - Kyocera 5035 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

(2) Accessing the machine default settings

Perform the following procedure when you want to access the
screens for each of the various machine default settings.
1 With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting"screen will be displayed.
2 Touch the "Machine default" key on the left side of the touch
panel.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
7-41
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 30 cpm copiers is "3000", for
40 cpm copiers is "4000" and for 50 cpm copiers is "5000".
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
4 If the entered code matched the registered one, the
"Machine default" screen will be displayed.
Inch specifications
Default setting / Counter
End
Machine default
Auto drawer switching
Paper size (1st drawer)
Paper size (2nd drawer)
Paper size (3rd drawer)
Paper size (4th drawer)
Default setting
Metric specifications
Default setting / Counter
End
Machine default
Auto cassette switching
Paper size (1st cassette)
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper size (4th cassette)
Default setting
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-56.)
• Refer to the desired procedure(s) explained under "(3) Making
machine default settings" and perform the corresponding setting(s).
Default menu Setting mode
On / All types of paper
Auto / Inch
Auto / Inch
Auto / Inch
Auto / Inch
Default menu Setting mode
On / All types of paper
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter
Close
Close
Close
Up
Down
Change #
Close
Up
Down
Change #