Kyocera 5035 Operation Manual page 177

Default setting
Paper type Sets and then displays the type of paper that is loaded in
(drawer[cassette] No.1 - drawers[cassettes] No.1 through No.4.
No. 4) * The setting for drawer[cassette] No.3 and No.4 will only
be available when the optional Paper Feeder is
installed on your copier.
Multi-bypass tray Turn this setting ON if you want the "Bypass setting"
settings display ON/OFF screen to be displayed whenever the "Bypass" key is
touched in the "Basic" tab.
Custom paper type for Sets whether or not each custom paper type (custom 1 –
2-sided copying custom 8) will be available for use in
2-sided copying.
-
Special paper action When copying onto prepunched, preprinted or letterhead
setting paper, and performing both 1-sided copying and 2-sided
copying from the same drawer[cassette], the positioning
of the holes in relation to the copied image may be
different for each copy or the front and rear images of 2-
sided copies may be copied onto the opposites sides of
the paper. If you select "Adj. print Direction", both 1-sided
and 2-sided copies will be created with the same
orientation.
Example: Set the paper as shown in the illustration
Adj. print
Direction
Speed
Priority
* When "Adj. print Direction" is selected, the speed of 1-
sided copying will be somewhat slower than normal.
* When making copies with "Adj. print Direction"
selected, set the paper as shown in illustration A and
with the first image being copied set face-down. (If the
optional Built-in Finisher is installed on your copier, set
the paper as shown in illustration B and with the first
image being copied set face-down.)
* If the optional Document Finisher or Built-in Finisher is
installed on your copier and you have selected either
the Staple mode or the Hole Punch mode, the direction
that the copy image is created in may not conform to
the desired position of the staples or holes.
Description
Setting 1-sided copying
Section 7 COPIER MANAGEMENT FUNCTIONS
Available
settings
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
High quality
Vellum
Custom 1 –
Custom 8
On / Off
On / Off
Adj. print Direction /
Speed Priority
Drawer[Cassette]
2-sided copying
Factory Reference
setting page
Plain 7-44
Off 7-45
On 7-46
Speed Priority 7-46-1
7-39