Kyocera 5035 Operation Manual page 268

Section 9 TROUBLESHOOTING
2 2 2 Misfeed in Document Processor (optional) (JAM 70 to 76) 2 2
If the message below appears, a misfeed has occurred in the
Document Processor. Remove the misfed original using the procedure
given below.
Inch specifications
Paper misfeed.
Metric specifications
Paper misfeed.
1 If the original is on the original table, remove it.
2 Open the Document Processor original cover.
9-10
1. Open the document processor.
2. Raise the reverse unit up.
3. Turn the left dial.
4. Remove original(s).
5. Close Document processor.
1. Open document processor.
2. Raise reverse unit up.
3. Turn dial left.
4. Remove original (s).
5. Close Document processor.
3 If the misfed original is found, remove it.
* If paper is torn during removal, be sure to remove all loose
scraps from inside the copier, or they could cause misfeed
later.
JAM 73
4 Raise the reversing unit.
5 If the misfed original is found, remove it.
JAM 73
* If paper is torn during removal, be sure to remove all loose
scraps from inside the copier, or they could cause misfeed
later.
6 Turn the left knob to eject and remove the misfed original.
7 Close the Document Processor original cover.