Kyocera 5035 Operation Manual page 196

Section 7 COPIER MANAGEMENT FUNCTIONS
● Changing the management code
Perform the following procedure to change the management code
used by the copy manager.
IMPORTANT!
If you change the management code from its factory default, be sure
to keep some sort of record of the new management code. If, for any
reason, you forget the registered management code, you will need to
contact your service representative.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2
Select "Management code change" ["Change MGMT code
with #"] in the settings list on the left side of the touch panel
and then touch the "Change #" key.
The "Management code change" ["Change MGMT code with
#"] screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Key sound ON/OFF
Silent mode
Date/Time
Time difference
Management code change
Metric specifications
Default setting / Counter
Machine default
Default menu
Key sound ON/OFF
Silent mode
Date/Time
Time difference
Management code change
7-56
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
On
On
2001/10/30 14:02
GMT+08:00
5000 Change #
Setting mode
On
On
2001/10/30 14:02
GMT+08:00
5000
Change #
3 Use the keypad to enter a new 4-digit management code.
Inch specifications
Management code change
Default setting - Machine default
Metric specifications
Change MGMT code with #
Default setting - Machine default
End
NOTE
Counter
If you want to quit the displayed setting without changing it, touch the
check
"Back" key. The touch panel will return to the screen in step 2.
User
Adjustment
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
End
5 Touch the "Close" key once again. The touch panel will return
Counter to the "Default setting"screen.
check
User
Adjustment
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
A bl e t o c h a n g e m a n a g e m e n t c o d e. ( # key )
A bl e t o c h a n g e m a n a g e m e n t c o d e. ( # key )
Back Close
Back Close