Kyocera 5035 Operation Manual page 115

$ Selecting the print page numbers mode
This procedure selects the print page numbers mode in order to have
page numbers printed on the corresponding copies.
1 Touch the "Edit" key. Then, in the resulting screen, touch the
"Page #" ["Page numbering"] key. The "Page #" ["Page
numbering"] screen will be displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto
Border Select
Erase orig.size
None None
Margin/
Page #
Centering
Basic Quality
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
Off Auto
Erase Select
size orig.
Mode
None None
Margin/ Page
numbering
Imag.shift
Basic Quality
NOTE
The setting in regard to the print page numbers mode can only be
made in the first step of the job build mode and will apply to all steps
in the copy job.
2 For more detailed information on this setting, refer to the
explanation for the print page numbers mode on page 5-16.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Page #
None P.1
-1- 1/n
Metric specifications
Ready to Job build.
Set original. Press Start key.
Page numbering
None P.1
-1- 1/n
3 Touch the "Close" key. The touch panel will return to the
screen in step 1.
Off
Insert page
Modify
Copy
2 sided copy-Left
Finished page # : 0
Edit
None
Insert
blank page
Modify
copy
2-sided Copy-Left
Finished page #: 0
Edit
Back
Page # can be added on bottom of copy.
Back
Page # can be added on bottom of copy.
Section 5 OTHER CONVENIENT FUNCTIONS
Set
End
Set
End
Set
Close
Set
Close
5-69