Kyocera 5035 Operation Manual page 167

● Non-standard printer driver printout (Printer)
Perform the following procedure when "On" is selected as the "Printer
function management ON/OFF" setting and you want to want to allow
the use of printer drivers other than those available under copy
management.
NOTE
This setting will only be available when "On" is selected as the "Printer
function management ON/OFF" setting.
1 Select "Others Mgt. Reg. (print)" under the "Setting item"
column on the left side of the touch panel and then touch the
"Change #" key.
The "Others Mgt. Reg. (print)" screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Copy management
Print. Managem.
Printer error report
Others Mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Fax Management
Default setting - Management - Managem. Def set.
Metric specifications
Managem. Def. Set.
Setting item
Copy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Fax Management
Default setting - Management - Managem. Def set.
Value
On
On
On
On
All
On Change #
On
Value
On
On
On
On
All
On
Change #
On
Section 7 COPIER MANAGEMENT FUNCTIONS
2 To allow the use of printer drivers other than those available
under copy management, touch the "On" key.
Inch specifications
Others Mgt. Reg. (print)
Output. of print. is possible for unspecif. ID-code
Default setting - Management - Managem. Def set.
Metric specifications
Others mgt. Reg. (print)
Output. of print. is possible for unspecif. ID-code
Close
Default setting - Management - Managem. Def set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
Close
3 Touch the "Close" key.
The touch panel will return to the screen in step 1.
Back
Off
On
Back
Off
On
Close
Close
7-29