Kyocera 5035 Operation Manual page 151

3 To set the maximum number of documents that can be
transmitted under this ID-code, touch the "Counter limit" key
and proceed to the next step.
To allow unlimited fax transmission, touch the "No limit" key,
and to cancel fax transmission privileges completely, touch
the "Is not permitted" key and proceed to step 5.
Inch specifications
Fax Transm. Limitation
No limit
Counter
limit
Is not
permitted
Management - Management edit - New register
Metric specifications
Fax Transm. Limitation
No limit
Counter
limit
Is not
permited
Management - Management edit - New register
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Use the numeric keys on the keypad to enter the maximum
number of documents that can be transmitted under this ID-
code. The document limit can be set to any 1-page increment
up to 999,999.
Inch specifications
Fax Transm. Limitation
Limited value
No limit
Counter
limit
Is not
permitted
Management - Management edit - New register
Metric specifications
Fax Transm. Limitation
Limited value
No limit
Counter
limit
Is not
permited
Management - Management edit - New register
5 Touch the "Close" key.
The touch panel will return to the screen in step 2.
Back
Back
Back
(1~999,999)
999,999
Clear
Back
(1~999,999)
999,999
Clear
Section 7 COPIER MANAGEMENT FUNCTIONS
Copying restrictions
Perform the following procedure when you want to set the maximum
number of copies that can be made under the corresponding
department ID-code.
NOTES
• This setting will only be available when "On" is selected as the
Close
"Copier function management ON/OFF" setting.
1 Access the screen that contains the copy restriction setting
items.
(See "Register new department ID-codes" on page 7-4 or
"Change restrictions for use" on page 7-20.)
Inch specifications
Close
Management edit
Department
01
02
0001
0014
00000015
00000016
00000017
Default setting - Management
Metric specifications
Management edit
Department
01
02
0001
0014
00000015
00000016
00000017
Default setting - Management
2 Select "Copy limitation" under the "Setting item" column on
the left side of the touch panel and then touch the "Change
#" key.
Close
The "Copy limitation" screen will be displayed.
Inch specifications
Limit in use
0007
Copy limitation
Printer limitation
Scanner limitation
Fax Transm. Limitation
Close
Default setting - Management - Management edit
Metric specifications
Limit in use
0007
Copy limitation
Printer limitation
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
Up
1st Sales Dept.
2nd Sales Dept.
3rd Sales Dept.
4th Sales Dept.
5th Sales Dept.
6th Sales Dept.
Down
7th Sales Dept.
001/010
Up
1st Sales Dept.
2nd Sales Dept.
3rd Sales Dept.
4th Sales Dept.
5th Sales Dept.
6th Sales Dept.
Down
7th Sales Dept.
001/010
1st Sales Dept.
Setting item Value
No limit
No limit
No limit
No limit
1st Sales Dept.
Setting item Value
No limit
No limit
No limit
No limit
Close
Order of
indication
Mgt. Inf. Limit
correction in use
Delete
Register
Close
Order of
indication
Mgt. Inf. Limit
correction in use
Delete
Register
Close
Change #
Close
Change #
7-13