Making Default Settings - Kyocera FS 9530DN Advanced Operation Manual

Using the Operation Panel

Making Default Settings

Default Emulation
2-42
Using the operation panel, you can set the default for the following items.
The emulation mode for the current interface can be changed.
1
Press [MENU].
2
Press or repeatedly until Emulation appears. One of the emulation
names shown below appears, indicating the current emulation.
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
3
Press [OK]. A blinking question mark (?)
appears.
4
Press or
5
Press [OK].
6
Press [MENU]. The message display returns to Ready.
KPDL (AUTO) Emulation
KPDL is the Kyocera's implementation of the PostScript language. The
KPDL (AUTO) emulation enables the printer to automatically change the
emulation mode according to the data received when printing.
In addition to KPDL (AUTO) emulation, you can use the operation panel to
set another emulation mode that is used very often. The default setting is
PCL 6.
1
Press [MENU].
2
Press or
appears.
3
Press [OK]. A blinking question mark (?)
appears.
repeatedly until the desired emulation mode appears.
repeatedly until Emulation
Emulation
?PCL 6
Emulation
PCL 6
Emulation
?PCL 6
ADVANCED OPERATION GUIDE