Default Setting Mode; Default Settings Items - Kyocera KM-1620 Operation Manual

Default Setting Mode

The copier will enter Default Setting Mode after warm up has been
completed or when the [Stop/Reset] key has been pressed. The
settings automatically set for the copier in Default Setting Mode
are called the Default Settings. These settings can be freely
changed to match the usage of the copier.

Default Settings Items

The following are the Default Settings Items.
Change the settings as necessary in order to achieve the most
efficient use of the copier. The factory default setting is indicated
by an asterisk (*).
Display
Settings Items
Items
F01 User Status Report
F02 Original Image
Quality
F03 Exposure Mode
F04 Eco-copy
F05 Exposure Steps
F06 Auto Exposure
Adjustment
F07 Text & Photo Mode
Exposure Adjustment
F08 Photo Exposure
Adjustment
F09 Text Adjustment
Exposure
F10 Processing to Reduce
Black Streaks
F11 Photo Processing
F12 Back Ground
Adjustment
Description
Outputs the content of the Default Settings.
Sets the manuscript image quality that will be selected
at the time the copier is turned on.
Sets the copy exposure at the time the copier is turned
on to Manual or Automatic.
* There will be no display when Photo has been
selected in F02.
Selects the initial value of the Eco-copy Mode when the
power is turned on. The initial value of the Eco Mode
can be set to on (Enable). Exposures will be lighter and
less toner will be consumed when the Eco-copy Mode is
used.
Changes the number of the adjustment steps for the
copy's exposure. 0.5 - Setting this step enables even
finer adjustment of the exposure.
Adjusts the overall exposure of the copy when Auto
Exposure Mode is used.
Adjusts the central exposure value for the copier's
manual exposure (Text and Photo).
Adjusts the central exposure value for the copier's
manual exposure (Photo).
Adjusts the central exposure value for the copier's
manual exposure (Text).
It is possible to make black streaking less noticeable
when it appears when using the optional Document
Processor.
Setting this to Error Diffusion when copying originals
with text and photos and Dithering when copying
originals with mainly photos will result in clearer
images.
The ground color can be lightened when it is found to
be too dark after copying.
Section 6 COPIER MANAGEMENT
Available settings
---
1-: Text & Photo
2-: Photo
3-: Text
1-: Manual*
2-: Automatic
on: Enabled
oFF: Disabled*
1-: 1 step*
2-: 0.5 step
1-(lightest) to 7-(darkest) (*4-)
1-(lightest) to 7-(darkest) (*4-)
1-(lightest) to 7-(darkest) (*4-)
1-(lightest) to 7-(darkest) (*4-)
1-: OFF*
2-: Weak
3-: Strong
1-: Error Diffusion*
2-: Dithering
1-(lightest) to 5-(darkest) (*3-)
Reference
Page
6-11
6-12
6-13
6-13
6-14
6-14
6-15
6-16
6-16
6-17
6-18
6-18
6-7