Answer A Call; End A Call; Point-To-Point Call Hold And Resume; Place A Point-To-Point Call On Hold - Polycom RealPresence Group Series User Manual

To place a call from the Recent Calls list:
1 From the Home screen, touch
2 Touch an entry to place the call.
You can filter the list by touching All, Placed, or Received.
To see more details about a call listed on the Recent Calls screen, touch

Answer a Call

If the Polycom RealPresence Group system does not answer incoming calls automatically, you are
prompted to answer manually.
» Touch Answer or Ignore when a call comes in.

End a Call

When your call is complete, hang up the call.
To hang up a call:
» From the Call screen, touch Hang Up.

Point-to-Point Call Hold and Resume

The RealPresence Group system supports call hold and resume in Microsoft Lync 2013 and H.323 calls.
Putting a call on hold pauses audio and video bidirectionally between RealPresence Group systems, remote
Lync clients, or Lync AV MCUs.
For information on multipoint call hold and resume, refer to

Place a Point-to-Point Call on Hold

In a point-to-point call, you can place a call on hold, and then answer an incoming call, make an outgoing
call, or switch between two calls. After you complete a call, you can resume the call you had on hold.
To place a point-to-point call on hold:
» On the Touch Control, touch Hold.
When a call is on hold, On Hold appears on the RealPresence Group system screen for 5 seconds.
After 5 seconds, the Hold icon
resumed.

Place a Point-to-Point Call on Hold and Answer a Call

At times, you might need to place a call on hold and answer an incoming call.
To place a call on hold to answer a call:
» Touch Hold + Answer.
Polycom, Inc.
and then touch Recent Calls.
Multiple Sites in Video
appears and remains on the screen until all calls disconnect or are
next to the entry.
Calls.
19