Stereo Audio In Video Calls; Audio Mute Notification For Near-End Site; Content - Polycom RealPresence Group Series User Manual

Stereo Audio in Video Calls

If your video conferencing room is configured to use stereo sound, the left and right microphone inputs are
configured during system setup. It is important that you do not move the microphones as this might detract
from the stereo audio experience.
Note: Stereo audio
Stereo audio is available only in video calls of 256 kbps or higher.

Audio Mute Notification for Near-End Site

When the near-end site microphone is muted and the RealPresence Group Series audio system detects
sound in the near-end site conference room, the RealPresence Group Series displays a You are muted
notification to warn you that your audio is muted. This message appears for 8 seconds on the near-end site
main display and is displayed once per audio mute session. Audio mute notification is automatic and no
intervention is required.

Content

To show people and content at the same time, the RealPresence Group systems must be configured for
content. You can show the following to the far-end systems:
● Any information stored on a computer connected directly to a Polycom RealPresence Group system
or a Polycom Touch Control
● Some types of information stored on a USB drive
● A paper document or object placed on a document camera
● A DVD or DVR player connected directly to a Polycom RealPresence Group system
● Content from the Polycom People+Content™ IP application (installed on a computer and connected
to the Polycom RealPresence Group system)
Note: Copyright-protected media
If you attempt to display copyright-protected content on the local interface, such as from a DVD or
DVR, the following message is shown on the RealPresence Group system: "This content is protected
and cannot be displayed or shared." This message appears in a call and out of a call.
You can show one content source and one people video source at a time, and you can switch to a different
type of content or people video source if you need to. Participants at other sites can also show content or
people video sources. Content shown is from one site at a time; another site sharing content overrides any
content being shared.
When you are showing content, a message appears on your main monitor. Whether you also see the
content on your monitor or projector depends on how your system was configured.
Note: Showing content on RealPresence Group 300 systems
To show content on a RealPresence Group 300 system, you must use the People+Content IP
application.
Polycom, Inc. 26