Enable Eagleeye Director Tracking In A Call; Disable Eagleeye Director Tracking In A Call; Camera Presets - Polycom RealPresence Group Series User Manual

2 Touch the arrow buttons on the Polycom Touch Control to move the camera up, down, left, or right.
3 Touch and

Enable EagleEye Director Tracking in a Call

If EagleEye Director tracking is enabled, the camera follows the person or people who are speaking. This
tracking action, also called automatic camera positioning, can be manually started or stopped.
You must start camera tracking using the menu before the Mute and Unmute buttons will again affect
tracking. After the call is complete, EagleEye Director returns to its default setting.
EagleEye Director
To enable EagleEye Director tracking in a call:
» On the Polycom Touch Control Home or Call screen, touch Cameras and select Start Camera
Tracking.

Disable EagleEye Director Tracking in a Call

While in a call, you might want to disable EagleEye Director tracking. When you stop camera tracking
through the menu, the Mute and Unmute buttons do not affect tracking.
To disable EagleEye Director tracking in a call:
» On the Polycom Touch Control Home or Call screen, touch Cameras and select Stop Camera
Tracking.

Camera Presets

Camera presets are stored camera positions that you can create ahead of time or during a call. Presets
allow you to do the following:
● Quickly point a camera at pre-defined locations in a room.
● Select a video source such as a document camera or an auxiliary camera.
If your system camera supports pan, tilt, and zoom movement, you can create up to 10 preset camera
positions for the near-end camera. Each preset stores the following information:
● Camera number
● Camera zoom level
● Direction the camera points
These presets remain in effect until you change them.
Polycom, Inc.
to zoom out and zoom in.
23