Allow The Far-End System To Control Your Camera; Adjust For Room Lighting; Allow Video Display On The Web - Polycom RealPresence Group Series User Manual

When your mute status changes due to a Microsoft Lync client organizer muting or unmuting all of the
participants, notification is displayed on the Polycom RealPresence Group system monitor.

Allow the Far-End System to Control Your Camera

If your system administrator has allowed access to user settings, you can allow the far-end system to control
your camera. Far-end participants can also set and use presets for your camera, if their systems support
presets.
User Tip. Setting display is immediate
Changing this setting takes effect immediately, even if a call is in progress.
To allow others in the call to control your camera:
1 From the Home screen, touch
2 Touch the RealPresence Group Series System tab.
3 Under Cameras, touch Far Control of Near Camera to enable the option.

Adjust for Room Lighting

If your system administrator has allowed access to user settings, you can use the backlight control to adjust
the brightness of the video that the main camera sends to the RealPresence Group system. Use backlight
compensation in situations where the subject appears darker than the background. Enabling this setting
helps to darken a bright background, which can impact the tracking performance of the Polycom EagleEye
Director.
User Tip: Backlight control display
Because backlight controls adjust the main built-in camera, these controls do not make content
displayed from a computer appear brighter.
To turn backlight compensation on:
1 From the Home screen, touch
2 Touch the RealPresence Group Series System tab.
3 Under Cameras, touch Backlight Compensation to enable the setting.
4

Allow Video Display on the Web

If your system administrator has allowed access to user settings, you can choose whether to allow viewing
of the room where the system is located or video of calls in which the system participates.
Caution: Default setting does not allow video display
The default setting is to not allow video display on the web. Be sure to verify whether your system
administrator wants the setting to be changed.
Polycom, Inc.
.
.
41