Video And User Interface Adjustments; Adjust Touch Control Brightness; Select Cameras With The Touch Control; Adjust Cameras - Polycom RealPresence Group Series User Manual

 Operating System Version
 Kernel Version
 MAC Address
 IP Address
2 To view the paired RealPresence Group system details, touch the RealPresence Group Series
System tab.

Video and User Interface Adjustments

Adjust Touch Control Brightness

You can adjust the brightness of the Polycom Touch Control screen.
To adjust the Polycom Touch Control display brightness:
1 From the Home screen, touch
2 Select the Touch Control tab if it is visible.
3 Use the slider under Display to adjust the brightness of the display.

Select Cameras with the Touch Control

You can use the Polycom Touch Control to select and adjust the main camera or other near-end or far-end
video sources. You might be able to adjust other auxiliary cameras or far-end cameras that support pan, tilt,
and zoom movement.
When you are in camera control mode, you can press and hold a number to save a preset. For more
information about presets, see
To use the Touch Control to select a near-end or far-end camera, or other video source:
1 From the Call screen or from the Home screen, touch
2 Touch Select Camera, and then touch the camera or other video source you want to use.
3 In a call, touch Near or Far to select either near-end or far-end control. The icon for the video source
moves up slightly on the screen, and the video source is shown to the call participants.

Adjust Cameras

After you select a camera, you can make some adjustments to enhance the view.
Note: Turn camera tracking off before adjustments
Before you can adjust the EagleEye Director camera, you must turn camera tracking off.
To adjust a Polycom EagleEye III, Polycom EagleEye IV, Polycom EagleEye Acoustic, or
Polycom EagleEye Director using the Polycom Touch Control:
1 Touch Control Camera.
Polycom, Inc.
.
Camera Presets.
.
22