Show Content From A Usb Drive With The Touch Control - Polycom RealPresence Group Series User Manual

Connections for a RealPresence Group 700 system
To start showing content:
1 From the Home screen or Call screen, touch Show Content.
2 Touch the video source to start showing content. Touch it again to stop showing content.
Note: Audio and analog content
• Audio from the content input is muted unless the content input is selected as a video source.
• If both digital and analog inputs are connected, only the digital content is sent.
• To send analog content, disconnect both digital and analog inputs, wait 15 seconds, then connect
only the analog input.
To stop showing content:
» From the Content screen of the Touch Control, touch the computer source to stop showing it.

Show Content from a USB Drive with the Touch Control

A Polycom Touch Control can show content stored on a USB drive.
To show content from a USB drive using a Polycom Touch Control:
1 Connect the USB device to the USB port on the right side of the Polycom Touch Control.
Polycom, Inc. 30