Removal Of Saddle And Battery - Husqvarna TC 450 Workshop Manual

Removal of saddle and battery

Turn counterclockwise the rear fastening pin (1) and remove the saddle.
TE-SMR-TXC: First remove the BLACK negative cable, then the RED positive
cable (when reassembling, first connect the RED positive cable and then the
BLACK negative cable); remove the battery (3) from its housing.
TXC: After battery removal, push ONCE THE ENGINE START BUTTON in order
to discharge the condenser (4) fastened to the frame cross tube, under the H.T.
coil (5) (over the cylinder head).
: After battery disassembly, DO NOT remove the condenser from the frame:
in case of engine starting in this condition, the voltage regulator will be damaged.
Part. N. 8000 H1344 (10-2009)
GENERAL OPERATIONS
E.15
1
TXC
4
TXC
3
5