Installation
3.5.3 Drain connection, machines without a drain pump
3.5.4 Drain connection, machines with a drain pump
The waste water system connected to (3) should consist of a 50 mm metal pipe
that will withstand mechanical impacts. The drain must run to a floor drain, where
its opening must be above the water level. The capacity of the floor drain must be
3 litres/second.
Ensure that the drain connection is kept in place by using e.g. cable ties in the
designated areas.
The drain connection (3) consists of a spiral hose. The drain is run to a washing-
up sink (A) where it must end at least 25 mm above the washing-up sink.
Ensure that the drain connection is kept in place by using e.g. cable ties in the
designated areas.
WD-7 DUPLUS
6D_dp
14
Rev. (201403)
A
3