Drain/Waste Pipe Connection - Wexiodisk WD-6 DUPLUS Installation And User Manual

Installation

3.5.3 Drain/waste pipe connection

The waste water system connected to (3) should consist of a 50 mm metal pipe
that will withstand mechanical impacts. The drain must run to a floor drain, where
its opening must be above the water level.
Ensure that the drain connection is kept in place by using e.g. cable ties in the
designated areas.
Machines with a drain pump (option)
3
Drain hose (A) consists of a spiral hose and is connected to the machine at (3)
and to the floor drain (B) as per one of the alternatives in the illustration.
Machines connected to WD-PRM6/7 (option)
See also "Installation and user manual" for WD-PRM6/7.
WD-6 DUPLUS
6D_dp_R1
14
Rev. 4.0 (202202)