Washing - Wexiodisk WD-7 DUPLUS Installation And User Manual

Instructions for use

4.2.3 Washing

The dishware must not be soaked or pre-washed in washing up liquid.
Make sure that the dishes are in a position where they cannot move out of the
washing basket during the washing and rinsing phases.
•
•
•
•
•
•
•
•
•
•
"P0" is a pause mode and is used for prolonged intervals between washes to
maintain the tank temperature. The hood must be closed. The machine does not
start in "P0" mode.
•
•
•
C
1
3 2
4
5
6
P1
7
P2
8
P3
9
6D_panel
Remove large pieces of food by rinsing the dishes with a hand shower. The
water in the hand shower must not exceed 40° C. Place the items to be
washed in the basket.
Open the hood. On machines with automatic hood lift, the hood is closed
with the button (5).
Put the lever (24) in the correct position for the items currently in the basket:
- is for normally soiled and + for heavily soiled dishware.
Select the programme. Slide the basket into the machine. If the machine is
fitted with "autostart", the hood closes automatically and washing starts af-
ter 5 seconds.
Close the hood. The machine starts washing using the selected pro-
gramme. The lower display (4) now shows the remaining washing time for
the programme.
The symbol (3) is lit during the washing phase. When the washing cycle fin-
ishes, the recirculating rinse starts and both symbols (2, 3) light up.
Once the rinsing phase starts, the symbol (2) lights up. If the final rinse wa-
ter has not reached the correct rinse temperature once rinsing starts, the
symbol (2) flashes and the machine continues washing until the rinsing wa-
ter has reached the correct temperature.
Do not open the hood until the programme has finished.
If the hood is opened during the washing cycle, the machine will stop. If the
hood is closed again, the programme will start from the beginning.
When the machine has stopped, the selected programme appears on the
display (4) and the hood opens automatically if the machine has an auto-
matic hood. Remove the washed items and allow them to dry.
Press the programme button for the current programme once. "P0" ap-
pears on the lower display (4).
Press the button again to return to the current programme.
The hood must be opened and closed between each washing cycle.
WD-7 DUPLUS
35
Rev. (201403)