Installing Auxiliary Equipment - Wexiodisk WD-7 DUPLUS Installation And User Manual

Installation

3.4.2 Installing auxiliary equipment

Once the machine is in place and has been adjusted horizontally and vertically,
the auxiliary equipment can be fitted.
The machine can be positioned so that it can be straight-loaded or corner-loaded.
Depending on the position chosen, the removable side support (4) on the basket
conveyor must be positioned as shown in the figures below.
NOTE: When connecting sinks and conveyors, no holes must be drilled on the
front of the machine. If holes need to be made in the machine, each hole must be
fitted with an edge strip or similar protection.
Position of the side support
1.
2.
3.
4.
Detail of sink cover
The connection profile must look like the one shown in the drawing. The distance
of 6 mm may be reduced, but must not be less than 3 mm.
WD-7 DUPLUS
1 3
4
2
2
Dishwasher
Sink
Basket conveyor
Side support
9
1 3
4
2
Rev. (201403)
2
..
Sidostod