Wexiodisk WD-7 DUPLUS Installation And User Manual page 52

Instructions for use
CODE CAUSE
Er32 Non-return valve for final rinse is faulty.
Er33 Non-return valve for recirculating rinse is faulty.
IF34 The detergent alarm.
The machine has run out of detergent.
IF35 The machine is started with the door/hood
closed.
Er96 The motor safety cut-out for the pump has
tripped.
Er97 One digital input is shorted to ground.
Er98 Communication fault between the CPU and the
panel card.
Er99 Communication fault between the computer and
panel cards.
WD-7 DUPLUS
ACTION
The alarm can be reset by pressing 0/1 on the
panel. Contact service personnel if the alarm re-
curs.
The alarm can be reset by pressing 0/1 on the
panel. Contact service personnel if the alarm re-
curs.
The alarm can be reset by pressing 0/1 on the
panel.
Check the amount of detergent and refill, if nec-
essary.
Open and close the door/hood to acknowledge
the alarm.
Contact service personnel.
Contact service personnel.
The alarm can be reset by pressing 0/1 on the
panel. Contact service personnel if the alarm re-
curs.
The alarm can be reset by pressing 0/1 on the
panel. Contact service personnel if the alarm re-
curs.
48
Rev. (201403)