■ Programming information
■ Programming information
We recommend that you should read out all the transceiver's data before start entering/editing parameters
even when the transceiver is factory fresh.
1Double-click the desired cell in the contents list screen directory, or right-click the cell to display the
edit menu. Then click [Edit... Enter] to select and change the setting depending on the item.
2Click [Help] to display the help screen for the item.
▒ NOTE: The above instructions are for reference only.
▒ Please refer to the HELP file of the cloning software when you don't understand the function or setting
▒ meaning.
64
Basic Setup of Cloning Software
The window shows up,
explaining how to set up RX / TX.