Icom IC-F9511T User Manual page 63

■ Connections
All cloning operations are performed from the computer's keyboard — the operation required on the
transceiver side is;
1 First, connect the cloning cable as illustrated below.
2 Then, rotate [VOL] to turn power ON.
to USB port
Screen description
➊ ➋
1. FILE MENU [File]
Used for saving memory channel contents,
printing the pre-programmed information or
exiting the program, etc.
2. VIEW MENU [View]
• Selects the displayed font size.
• Turn the tool bar indication ON or OFF.
3. COM PORT MENU [COM Port]
• Click to display the COM port (1 to 4 and More)
setting dialog box.
• Set the transfer speed (Normal or High).
▒ NOTE: 'Check the following' dialog box appears
▒ when the COM port is not set correctly.
4. CLONING MENU [Clone]
Click to display the cloning menu and cloning
information dialog box.
Basic Setup of Cloning Software
PC
to the MIC
connector
OPC-1122U
(USB type)
➌ ➍ ➎ ➏ ➐
➑
[POWER]
IC F9510 series IC-F9510 series
TRANSCEIVER
➒
5. Adjust
Program the adjustment frequencies in the zone
screen.
6 HELP MENU [Help] 6. HELP MENU [Help]
Click to display the help contents and cloning
software revision information.
7. TOOL BAR
Shortcut buttons appear on the tool bar when the
tool bar indication is turned ON in the [View]
menu.
8 TREE VIEW SCREEN 8. TREE VIEW SCREEN
Click the folder icon which you want to edit.
9. CONTENTS LIST SCREEN
Display the contents list (Memory CH information,
Common settings, etc.).
63