Frequently Asked Questions; Making A Copy Of A Non-Standard Size Original - Sharp MX-C312 Operation Manual

FREQUENTLY ASKED QUESTIONS

MAKING A COPY OF A NON-STANDARD SIZE
ORIGINAL
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centring" special mode of copy mode can be selected to position the copied
image in the centre of the paper.
1 Place the originals.
If the X dimension (width) of the document is less than
85 mm (3-1/4") or the Y dimension (height) is less than
51 mm (2"), place the original on the document glass.
When using the automatic document feeder, use "Slow
Scan Mode" for a thin original.
2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
Original
Size Input
8-3
TROUBLESHOOTING
OK
Cancel OK
200
X
(25 356)
mm
Y 150
(25 216)
mm
Contents