Printing A Stored File - Sharp MX-C312 Operation Manual

Digital full colour multifunctional system
Hide thumbs Also See for MX-C312:
Table of Contents

Advertisement

PRINTING A STORED FILE

A file stored using document filing can be retrieved and printed when needed. The settings used when the file was
stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before
printing by changing the print settings.
After selecting the desired file, follow the steps below.
SELECTING A FILE
(page 6-29)
Job Settings
file-01
Select the job.
1
Print
Send
Move
Delete
Job Settings / Print
file-01
Paper Select
Number of Prints
Auto
2
Output
2-Sided
Special Modes
• A file saved in black and white or greyscale cannot be printed in colour.
• When a long size document is stored from Scan to HDD or scan mode, the file cannot be printed. A file stored from scan
mode that included fax mode or Internet fax mode destinations in a broadcast transmission can be printed.
• If print settings are changed when a stored file is printed, the only changed setting that can be stored is the number of
copies.
• The printing speed may be somewhat slow depending on the resolution and exposure mode settings of the stored file.
Cancel
Name 1
A4
F. Colour
Property
Image Check
Change
Detail
Cancel
Name 1
A4
F. Colour
1
Print and Delete the Data
(1 999)
Print and Save the Data
B/W Print
Touch the [Print] key.
Touch the [Print and Delete the Data] key
or the [Print and Save the Data] key.
If the [Print and Delete the Data] key is touched, the files will be
automatically deleted after printing.
If the [Print and Save the Data] key is touched, the files will be
saved after printing.
Output settings, 2-sided printing, special modes, the number of
copies, and other settings can be selected. For more
information, see
"PRINT SETTINGS
6-31
DOCUMENT FILING
SCREEN" (page 6-32).
Contents

Advertisement

Table of Contents
loading

Table of Contents