Remote Operation Of The Machine - Sharp MX-C312 Operation Manual

Digital full colour multifunctional system
Hide thumbs Also See for MX-C312:
Table of Contents

Advertisement

REMOTE OPERATION OF THE MACHINE

The remote operation function allows you to operate the machine from your computer.
When this function is added, the same screen as the operation panel screen appears on your computer. This allows you
to operate the machine from your computer in the same way as if you were standing in front of the machine.
Operate the
machine using
your computer
screen.
The remote operation function can only be used on one computer at a time.
How to use the remote operation function
Before using this function, set "Operational Authority" to "Allowed" in "Remote Software Operation" of "Remote
Operation Settings" in the system settings (administrator).
7. SYSTEM SETTINGS
To use the remote operation function, the machine must be connected to a network and a VNC application must be
installed on your computer (recommended VNC software: RealVNC).
The procedure for using this function is as follows:
Example: RealVNC
1
Follow the prompts on the operation panel of the machine to permit the
connection.
2
When the machine is connected to the remote software,
If you wish to disconnect, exit the remote software or touch
Use the operation panel in the same way as you would on the machine. Note that a key cannot be held down to continuously
change a value being entered. For detailed procedures, see the chapters for each of the functions in this manual.
System Settings (Administrator): Remote Operation Settings
Set the operation authority for the remote operation function.
These settings can also be configured in the Web pages. Click "System Settings", "Operation Setting" and then "Remote
Operation Settings" in the Web page menu.
Your computer
"Remote Operation
Settings" (page 7-64)
(3)
(2)
BEFORE USING THE MACHINE
Operation panel
Network
Connect from the computer to the
machine.
(1) Start the VNC viewer
(2) Enter the IP address of the machine in the
"Server" entry box.
(3) Click the [OK] button.
appears on the system bar of the machine's touch panel.
.
1-23
The machine
Contents

Advertisement

Table of Contents
loading

Table of Contents