Replacing The Drum Cartridge - Sharp MX-C312 Operation Manual

REPLACING THE DRUM CARTRIDGE

Your service technician will replace the drum cartridge. Only replace the cartridge as explained below if your service
technician instructs you to. Follow the instructions carefully.
• Do not leave the drum cartridge outside of its package for a long time, and do not remove cartridge from its
package in a location where there is bright sunlight or bright light. This may cause a failure.
• When you remove a drum cartridge, place it in a dark location and do not allow light to shine on the cartridge.
Turn off the power and remove the developer cartridge.
For the procedure for removing the developer cartridge, see steps 1 to 4 of
(page 1-55).
To remove the drum cartridge, the developer cartridge must first be removed.
1
2
Do not touch toner on the old drum cartridge. If you accidentally touch the toner, immediately wash your hands.
BEFORE USING THE MACHINE
"REPLACING THE DEVELOPER
Drum cartridge
Developer cartridge
Hold down the lever on the drum
cartridge with your finger and pull the
drum cartridge toward you.
Place one hand at the middle of the drum cartridge and pull out
with both hands.
1-59
CARTRIDGE"
Contents