Installing The Printer Driver / Pc-Fax Driver; When The Machine Is Connected To A Network - Sharp MX-C312 Operation Manual

6
* The above screen appears when using the "Disc 1"
CD-ROM.
For the steps that follow, see the appropriate page below for the software that you are installing.

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

•

WHEN THE MACHINE IS CONNECTED TO A NETWORK

- Standard installation: page 1-87
- Installation by specifying the machine's
- Printing using the IPP function and the SSL
• WHEN THE MACHINE WILL BE CONNECTED WITH A USB
• USING THE MACHINE AS A SHARED
INSTALLING THE PRINTER STATUS
INSTALLING THE SCANNER
*
If the machine is being used on an IPv6 network, see
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this section depending on whether
the machine is connected to a network or connected by USB cable.
☞
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE
WHEN THE MACHINE IS CONNECTED TO A NETWORK
This section explains how to install the printer driver and the PC-Fax driver when the machine is connected to a
Windows network (TCP/IP network).
Supported operating systems: Windows XP*/Server 2003*/Vista*/Server 2008*/7*
* Administrator's rights are required to install the software.
• To print to the machine over the Internet using the IPP function when the machine is installed in a remote location, or to
print using the SSL (encrypted communication) function, see
1-93) and install the printer driver or the PC-Fax driver.
• If the machine is connected to an IPv6-only network
The software cannot be installed by detecting the machine's address from the installer. After installing the software as
explained in "Installation by specifying the machine's
Standard TCP/IP Port" (page 1-109).
• The installation procedure in this section is for both the printer driver and the PC-Fax driver, although the explanations are
centreed on the printer driver.
address: page 1-90
function: page 1-93
PRINTER: page 1-99
MONITOR: page 1-104
DRIVER: page 1-105
"Installation by specifying the machine's
BEFORE USING THE MACHINE
The software selection screen appears.
The software selection screen appears.
Before installing the software, be sure to click the [Display
Readme] button and view the detailed information on the
software.
*
CABLE: page 1-95
(page 1-95)
"Printing using the IPP function and the SSL
address" (page 1-90), change the port as explained in
1-86
address" (page 1-90).
function" (page
"Changing to a
Contents