Frequently Asked Questions; Making A Copy Of A Non-Standard Size Original; Place The Originals - Sharp MX-M264N Operation Manual

FREQUENTLY ASKED QUESTIONS

Making a copy of a non-standard size original

1 Place the originals.

3 Place paper in the bypass tray.
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centering" special mode of copy mode can be selected to position the copied
image in the center of the paper.
If the X dimension
(width) of the
document is less than
5-1/2" (140 mm) or
the Y dimension
(height) is less than
5-1/8" (131 mm),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
Type : Recycled
Size : 8-1/2" x 11"
2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
Original
Size Input
4 Select the bypass tray.
From the base screen of copy mode, touch [Paper
Select] and then "Bypass tray paper type".
Paper Select
Bypass Tray Type/Size Setting
Select the paper type.
Plain Pre-Printed
Pre-Punched
Heavy Paper Transparency
Heavy Paper: 28 lbs.bond, -110 lbs.index (106 - 200 g/m
Paper Select
Paper Tray
1. 8½x11
2. 8½x11R
3. 8½x14
4. 11x17
8-3
TROUBLESHOOTING
OK
Cancel OK
X 8
(1-17)
inch
Y 6
(1-11 5/8)
inch
Cancel
1
2
Recycled Letter Head
Color Thin Paper Labels
Tab Paper Envelope
2 )
OK
Bypass Tray
8½x11
Plain
Recycled
Plain
Plain
Plain
Contents