Sharp MX-C312 Operation Manual page 732

Settings
Item
Items common to all types
Box Type
Memory Box Name
Sub Address / Passcode
Items displayed when storing a confidential memory box
Print PIN
Items displayed when storing a relay broadcast memory box
Recipients
• When programming a new memory box, a sub-address that is already programmed for another box cannot be used.
However, the same passcode can be used for more than one memory box.
• A passcode can be omitted.
• [ ] and [#] cannot be used in a sub-address.
• Do not forget the Print PIN. In the event that you forget the Print PIN or need to verify the Print PIN, contact your dealer or
nearest authorised service representative.
Select the type of box.
• Polling Memory: Store a memory box for F-code polling memory. The
sub-address and passcode that you program in the memory
box are necessary for the other machine to poll your machine
(request transmission) using F-code communication.
• Confidential: Store a memory box for F-code confidential reception. In
addition, store a "Print PIN" in the memory box to print faxes
received by confidential reception. The sub-address and
passcode that you program in the memory box are necessary
for the other machine to send a fax to your machine by
F-code confidential transmission.
• Relay Broadcast: Store a memory box for F-code relay broadcast transmission.
Store the fax numbers of the end recipients (up to 30) in the
memory box. The sub-address and passcode that you
program in the memory box are necessary for the other
machine to perform an F-code relay request transmission
(ask your machine to relay a fax).
Enter a name (maximum of 18 characters) for the memory box.
Enter a sub-address and passcode. A maximum of 20 digits can be entered for
each.
Separate a sub-address and passcode by a slash ("/").
Set a "Print PIN" for confidential reception. Enter a 4-digit number.
Select the end recipients of the relay broadcast. Select the recipients from the
address book.
• Direct Entry: An address that is not stored in the address book can be
directly entered. Enter the address in the same way as when
storing an address for a mode.
• Address Review: This displays a list of the selected recipients. Addresses can
be deleted from this list if needed.
7-102
SYSTEM SETTINGS
Description
Contents