Using The Automatic Document Feeder To Send A Fax In Direct Transmission Mode - Sharp MX-C312 Operation Manual

USING THE AUTOMATIC DOCUMENT FEEDER TO
SEND A FAX IN DIRECT TRANSMISSION MODE
Indicator
line
1
(3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
Sub Address III III
2
Freq.
Sort Address
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot
be used.
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Scan Internet Fax
Address Book
Original
Direct TX Exposure
Sub Address
Resolution
3
Special Modes
Address Review
File
Quick File
Press the [BLACK & WHITE START] key.
Transmission begins.
4
To cancel transmission...
While "Dialling. Press [
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGH IJKL MNOP QRSTU VWXYZ
Auto Reception
Fax Memory:100%
"ENTERING DESTINATIONS" (page 4-17).
Fax USB Mem. Scan PC Scan
Scan: Send: Auto
A4
Auto
Standard
Auto Reception
Fax Memory:100%
] to cancel." appears or while the fax is being transmitted, press the [STOP] key (
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
1
For the [Address Book] key, see
2
FAX MODE" (page 4-8).
(2) Touch the one-touch key of the desired
destination.
etc. (3) Touch the [Condition Settings] key.
Touch the [Direct TX] key.
4-31
FACSIMILE
(page )
4-46
"BASE SCREEN OF
).
Contents