Frequently Asked Questions; Making A Copy Of A Non-Standard Size Original - Sharp MX-C402SC Operation Manual

FREQUENTLY ASKED QUESTIONS

MAKING A COPY OF A NON-STANDARD SIZE
ORIGINAL
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centering" special mode of copy mode can be selected to position the copied
image in the center of the paper.
1 Place the originals.
If the X dimension (width) of the document is less than
3-1/4" (85 mm) or the Y dimension (height) is less than
2" (51 mm), place the original on the document glass.
When using the automatic document feeder, use "Slow
Scan Mode" for a thin original.
2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
Original
Size Input
8-4
TROUBLESHOOTING
OK
Cancel OK
8
X
(1-14)
inch
Y 6
(1-8 1/2)
inch
Contents