When The Machine Will Be Connected With A Usb Cable - Sharp MX-C312 Operation Manual

WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE

• Make sure that a USB cable is not connected to your computer and the machine.
If a cable is connected, a Plug and Play window will appear. If this happens, click the [Cancel] button to close the window
and disconnect the cable.
• To use the port created when the printer driver is installed for fax data transfer, install the printer driver first and then install
the PC-Fax driver.
When the software selection screen appears in step 6 of
ALL SOFTWARE)" (page 1-85), perform the steps below.
1
2
3
BEFORE USING THE MACHINE
"OPENING THE SOFTWARE SELECTION SCREEN (FOR
Click the [Printer Driver] button.
Click the [Custom installation] button.
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
1-95
Contents