Sharp MX-C312 Operation Manual page 191

Original
Size Input
3
You can also touch the
The stored original size will be retained even if the main power is turned off.
To cancel the operation...
Press the [CLEAR ALL] key (
(1) (3)
OK
Cancel OK
297
X
(25~356)
mm
Y 210
(25~216)
mm
(2)
keys to change the number.
).
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
Touch the X (width) numeric value display key to open a
number entry screen. Enter the width of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. A dimension from 25 mm to 356 mm (1" to
14") can be entered.
(2) Enter the Y (vertical) dimension of the
original.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. A dimension from 25 mm to 216 mm (1" to
8-1/2") can be entered.
(3) Touch the [OK] key.
2-32
COPIER
Contents