Specifying The Scan Size And Send Size - Sharp MX-C312 Operation Manual

SPECIFYING THE SCAN SIZE AND SEND SIZE

When the original is placed, the original size and the send size set in the system settings appear in the base screen as
the original size and send size.
In the above screen, the scan size (the original size) is A4 (8-1/2" x 11") and the send size is auto. If, for example, the
scan size were A4 (8-1/2" x 11") and the send size were B5 (5-1/2" x 8-1/2"), the image would be reduced before
transmission.
If the size of the placed original is different from the displayed original size, specify the original size.
☞
Specifying the original scan size (by paper size)
☞
Specifying the original scan size (by numerical values)
System Settings (Administrator): Default Original Size Settings
Set this if you frequently use a particular original size. The set size will appear in the [Original] key. When this setting is
configured, changing the original size can be omitted.
When this setting is configured, changing the original size can be omitted.
Scan Internet Fax
Address Book
Original
Direct TX Exposure
Sub Address
Resolution
Address Review Special Modes
File
Quick File
"Scan Size"
"Send Size" is set to
B5 (5-1/2" x 8-1/2")
A4 (8-1/2" x 11")
Fax USB Mem. Scan PC Scan
Scan: A4 Send: Auto
Auto
Standard
Auto Reception
Fax Memory:100%
Transmission
The image is reduced
to B5 (5-1/2" x 8-1/2")
before transmission
(page 4-47)
(page 4-49)
4-46
FACSIMILE
Contents