Changing The Print Settings For The Transaction Report - Sharp MX-C312 Operation Manual

CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT
(Transaction Report)
A transaction report is automatically printed out to alert you when a transmission fails or when a broadcast transmission
is performed. The transaction report contains a description of the transmission (date, start time, name of other party,
time required, number of pages, result, etc.).
☞
INFORMATION APPEARING IN THE RESULT COLUMN
Transaction reports are printed based on conditions set in the system settings; however, you can temporarily select
different conditions for a transmission. To change the transaction report print conditions at the time of transmission,
follow the steps below.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
When the original is a different size than the size setting, set the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
Select the special modes.
(1) Touch the [Special Modes] key.
3
(2) Touch the [Transaction Report] key.
☞
SPECIAL MODES
Fax/Special Modes
Transaction Report
Always Print
Print Original Image
4
• The print conditions for a transaction report are as follows:
"Always Print": A transaction report is printed no matter whether the transmission succeeds or fails.
"Print at Error": A transaction report is printed when transmission fails.
"Do not Print": Do not print a transaction report.
• When the [Print Original Image] checkbox is selected
transaction report.
• Even if the [Print Original Image] checkbox is selected
direct transmission, polling reception, or F-code transmission is used.
(page 4-17)
(page 4-65)
(1) (2)
OK
Cancel OK
Print at Error Do not Print
(page 4-121)
(page )
4-46
Select print conditions.
(1) Select the print conditions.
(2) Touch the [OK] key.
, part of the transmitted original is included on the
, the original cannot be printed when speaker dialling,
4-81
FACSIMILE
Contents